Hotcoat Powder Coating Reflective Chrome 8 oz Reviews
Reflective Chrome is the most reflective powder currently available. This polyester powder cures in 20 minutes (after flow-out) at 375ºF. For best results, topcoat with our Ultra-Clear Low-temp Topcoat (10329) or as a base coat with one of the translucent powders.
NOTE: We have been getting some customer feedback about substantial dulling of the Reflective Chrome when the Clear powder is applied and cured. While some dulling is unavoidable, substantial dulling usually indicates that the Reflective Chrome was not completely cured. To fully cure the 10285 Reflective Chrome before applying and curing the clear powder we recommend following these curing directions: Light sheet metal parts like valve covers, air cleaners, etc. will cure within 20-30 minutes at 375 F. after flow out occurs. (flow out refers to the transitions from a dull powder look to a glossy liquid look)Heavy parts like wheels, intake manifolds will cure within 50-60 minutes at 375 F after flow out occurs. Cure temperature must not exceed 375 F as wrinkling may occur. This powder, and most others, will tolerate longer bake times without adversely effecting appearance or durability of the coating.
Visit Store Now !!
Detail Products
Detail Reviews
Jun 17, 2011 22:55:04
No comments:
Post a Comment